Professional Classic Series: Direct Vent
MODEL PROG40-30P RH62 DV
Tank - 6 Years limited
Parts - 6 Years limited
Parts - 6 Years limited
- .61 EF
- SCAQMD Rule 1121 compliant
- Flexible venting options
- 40 and 50 gallon capacities
Select Capacity
40
Gallons
50
Gallons
SKU PROG40-30P RH62 DV
Model Professional Classic Direct Vent
Tank Capacity 40
Fuel Propane Gas
Height 60.88"
Width 19.75"
Single Shower Minutes 18
Number Back To Back Showers 2
Professional Classic™ Direct Vent gas water heaters use outside air for combustion, offer longer venting options and a coaxial vent for easy installation
Efficiency- .61 EF
- Well insulated for reduced stand-by heat loss
- FHR: 78 gallons for 50-gallon model and 66 gallons for 40-gallon model
- Recovery: 30.3 to 36.4 GPH at a 90° F rise, depending on model
- Adjustable coaxial vent allows flexibility of installation, can swivel 360 degrees and uses outside air for combustion and requires no electrical power
- Aluminum vent and cap base to prevent staining of building exterior
- Longer venting options available, see chart on reverse
- Order Horizontal Vent Kit: #SP20131
- Order Vertical Vent Kit: #SP20132
- Exclusive air/fuel shut-off device
- Maintenance free – no filter to clean
- Disables the heater in the presence of flammable vapor accumulation
- Meets 40 ng/J NOx requirements
- Premium grade anode rod provides long-lasting tank protection
- Enhanced flow brass drain valve
- Temperature and pressure relief valve included
- Low lead compliant
- Exclusive Rheemglas® tank lining resists corrosion and prolongs tank life
- Heat saving flue baffle design
- Gas control and combination thermostat
- Piezo ignition
- High temperature silicone bands reduce venting installation time
- Internal air tube for reduced footprint
- EverKleen™ patented system fights sediment build-up
Tank - 6 Years limited
Parts - 6 Years limited
Parts - 6 Years limited
More Residential Rheem Products
Find additional documentation by viewing these related products.
Natural Gas
Propane Gas
Professional Classic Series: Heavy DutyCapacity 60-75
Professional Classic™ Heavy Duty gas
(Not Available in US)
- The perfect match for high volume hot water applications
- Higher BTU inputs for faster recovery and more hot water
- 60 and 75 gallon
Natural Gas
Professional Classic Plus Series: Induced DraftCapacity 29-29
- .70 EF
- Fan assisted design
- 90 Gallon FHR Performance
- 60,000 BTU
- Available in 29 gallon gas model
Natural Gas
Propane Gas
Professional Classic Plus Series: Heavy Duty Power Direct VentCapacity 65-75
- .62 EF
- Flammable vapor detection system
- 75 gallon capacities
- Two pipe system: one pipe pulls in outside air for combustion and the other exhausts combustion gases
Propane Gas
Natural Gas
Professional Classic Plus Series: Heavy Duty Power VentCapacity 75-75
- .57 EF
- Standard 110 VAC electrical connection
- 75 gallon tall and short capacities


